Capped Starlock® for Metric Round Shafts

Image of Starlock caps Capped Starlock

Standard Starlocks are available in Spring or Stainless Steel.
Non standards may be subject to minimum order quantity.

View our PDFDownload our metric capped Starlocks PDF

Please use this page for Starlock® Capped Push On Fasteners for Imperial Round Shafts.

Capped Starlock® fasteners are available in Stainless Steel (S) Zinc Plated Mild Steel (A).

Capped Starlock® for Metric Round Shafts
ABCDType of CapOther InfoBox QTY
Shaft Size
Inch
Part No:
Capped
Dome cap Axle cap Deep
Axle cap
Shaft
Penetration
Height Cap Size Dome Axle Deep
Axle
1.5mm 6669 7.2mm #N/A #N/A 1.40mm 2.70mm 0 S Non Standard 5,000
1.5mm720410.67mm10.67mm#N/A2.54mm3.05mm1SStandard1,000
1.5mm720410.67mm10.67mm#N/A3.43mm3.96mm1SStandard1,000
2mm71547.2mm#N/A#N/A1.40mm2.70mm0SNon Standard5,000
2mm666210.67mm10.67mm#N/A2.54mm3.05mm1SStandard1,000
2.7mm808719.81mm19.82mm19.74mm4.50mm5.80mm4SNon Standard1,000
2.7mm808719.81mm19.82mm19.74mm5.50mm5.97mm4SNon Standard1,000
3mm80467.2mm#N/A#N/A1.40mm2.70mm0SNon Standard5,000
3mm666310.67mm10.67mm#N/A2.54mm3.05mm1SSStandard1,000
3mm830012.32mm12.45mm12.32mm3.05mm3.76mm2SNon Standard1,000
3mm830012.32mm12.45mm12.32mm4.06mm4.45mm2SNon Standard1,000
3mm830012.32mm12.45mm12.32mm5.50mm5.69mm2ANon Standard1,000
3mm807819.81mm19.82mm19.74mm4.50mm5.80mm4SNon Standard1,000
3mm807819.81mm19.82mm19.74mm5.50mm5.97mm4SNon Standard1,000
3mm807819.81mm19.82mm19.74mm7.70mm8.13mm4ANon Standard1,000
3mm804829.4mm#N/A#N/A7.00mm9.00mm6ANon Standard1,000
3.5mm803210.67mm10.67mm#N/A2.54mm3.05mm1SNon Standard1,000
3.5mm803210.67mm10.67mm#N/A3.43mm3.96mm1SNon Standard1,000
4mm666512.32mm12.45mm12.32mm3.05mm3.76mm2SStandard1,000
4mm666512.32mm12.45mm12.32mm4.06mm4.45mm2SStandard1,000
4mm666512.32mm12.45mm12.32mm5.50mm5.69mm2AStandard1,000
4mm804512.32mm12.45mm12.32mm3.05mm3.76mm2SNon Standard1,000
4mm804512.32mm12.45mm12.32mm4.06mm4.45mm2SNon Standard1,000
4mm804512.32mm12.45mm12.32mm5.50mm5.69mm2ANon Standard1,000
4mm808316.32mm16.26mm16.13mm4.06mm5.08mm3SNon Standard1,000
4mm808316.32mm16.26mm16.13mm4.55mm5.08mm3SNon Standard1,000
4mm808316.32mm16.26mm16.13mm6.70mm7.20mm3ANon Standard1,000
4mm804319.81mm19.82mm19.74mm4.50mm5.80mm4SNon Standard1,000
4mm804319.81mm19.82mm19.74mm5.50mm5.97mm4SNon Standard1,000
4mm804319.81mm19.82mm19.74mm7.70mm8.13mm4ANon Standard1,000
4mm807926mm26.11mm#N/A6.00mm7.50mm5SNon Standard500
4mm807926mm26.11mm#N/A6.86mm7.24mm5SNon Standard1,000
4.5mm720612.32mm12.45mm12.32mm3.05mm3.76mm2SNon Standard1,000
4.5mm720612.32mm12.45mm12.32mm4.06mm4.45mm2SNon Standard1,000
4.5mm720612.32mm12.45mm12.32mm5.50mm5.69mm2ANon Standard1,000
5mm831210.67mm10.67mm#N/A2.54mm3.05mm1SNon Standard1,000
5mm831210.67mm10.67mm#N/A3.43mm3.96mm1SNon Standard1,000
5mm666412.32mm12.45mm12.32mm3.05mm3.76mm2SStandard1,000
5mm666412.32mm12.45mm12.32mm4.06mm4.45mm2SStandard1,000
5mm666412.32mm12.45mm12.32mm5.50mm5.69mm2AStandard1,000
5mm803712.32mm12.45mm12.32mm3.05mm3.76mm2SNon Standard1,000
5mm803712.32mm12.45mm12.32mm4.06mm4.45mm2SNon Standard1,000
5mm803712.32mm12.45mm12.32mm5.50mm5.69mm2ANon Standard1,000
5mm807412.32mm12.45mm12.32mm3.05mm3.76mm2SNon Standard1,000
5mm807412.32mm12.45mm12.32mm4.06mm4.45mm2SNon Standard1,000
5mm807412.32mm12.45mm12.32mm5.50mm5.69mm2ANon Standard1,000
5mm725016.32mm16.26mm16.13mm4.06mm5.08mm3SNon Standard1,000
5mm725016.32mm16.26mm16.13mm4.55mm5.08mm3SNon Standard1,000
5mm725016.32mm16.26mm16.13mm6.70mm7.20mm3ANon Standard1,000
6mm720512.32mm12.45mm12.32mm3.05mm3.76mm2SNon Standard1,000
6mm720512.32mm12.45mm12.32mm4.06mm4.45mm2SNon Standard1,000
6mm720512.32mm12.45mm12.32mm5.50mm5.69mm2ANon Standard1,000
6mm804012.32mm12.45mm12.32mm3.05mm3.76mm2SNon Standard1,000
6mm804012.32mm12.45mm12.32mm4.06mm4.45mm2SNon Standard1,000
6mm804012.32mm12.45mm12.32mm5.50mm5.69mm2ANon Standard1,000
6mm666616.32mm16.26mm16.13mm4.06mm5.08mm3SStandard1,000
6mm666616.32mm16.26mm16.13mm4.55mm5.08mm3SStandard1,000
6mm666616.32mm16.26mm16.13mm6.70mm7.20mm3AStandard1,000
6mm703616.32mm16.26mm16.13mm4.06mm5.08mm3SNon Standard1,000
6mm703616.32mm16.26mm16.13mm4.55mm5.08mm3SNon Standard1,000
6mm703616.32mm16.26mm16.13mm6.70mm7.20mm3ANon Standard1,000
6mm807516.32mm16.26mm16.13mm4.06mm5.08mm3SNon Standard1,000
6mm807516.32mm16.26mm16.13mm4.55mm5.08mm3SNon Standard1,000
6mm807516.32mm16.26mm16.13mm6.70mm7.20mm3ANon Standard1,000
6mm803119.81mm19.82mm19.74mm4.50mm5.80mm4SNon Standard1,000
6mm803119.81mm19.82mm19.74mm5.50mm5.97mm4SNon Standard1,000
6mm803119.81mm19.82mm19.74mm7.70mm8.13mm4ANon Standard1,000
6.75mm715819.81mm19.82mm19.74mm4.50mm5.80mm4SNon Standard1,000
6.75mm715819.81mm19.82mm19.74mm5.50mm5.97mm4SNon Standard1,000
6.75mm715819.81mm19.82mm19.74mm7.70mm8.13mm4ANon Standard1,000
7mm667016.32mm16.26mm16.13mm4.06mm5.08mm3SStandard1,000
7mm667016.32mm16.26mm16.13mm4.55mm5.08mm3SStandard1,000
7mm667016.32mm16.26mm16.13mm6.70mm7.20mm3AStandard1,000
7mm808516.32mm16.26mm16.13mm4.06mm5.08mm3SNon Standard1,000
7mm808516.32mm16.26mm16.13mm4.55mm5.08mm3SNon Standard1,000
7mm808516.32mm16.26mm16.13mm6.70mm7.20mm3ANon Standard1,000
8mm667116.32mm16.26mm16.13mm4.06mm5.08mm3SStandard1,000
8mm667116.32mm16.26mm16.13mm4.55mm5.08mm3SStandard1,000
8mm667116.32mm16.26mm16.13mm6.70mm7.20mm3AStandard1,000
8mm807616.32mm16.26mm16.13mm4.06mm5.08mm3SNon Standard1,000
8mm807616.32mm16.26mm16.13mm4.55mm5.08mm3SNon Standard1,000
8mm807616.32mm16.26mm16.13mm6.70mm7.20mm3ANon Standard1,000
8mm720719.81mm19.82mm19.74mm4.50mm5.80mm4SNon Standard1,000
8mm720719.81mm19.82mm19.74mm5.50mm5.97mm4SNon Standard1,000
8mm720719.81mm19.82mm19.74mm7.70mm8.13mm4ANon Standard1,000
8mm724326mm26.11mm#N/A6.00mm7.50mm5SNon Standard500
8mm724326mm26.11mm#N/A6.86mm7.24mm5SNon Standard500
8.5mm803316.32mm16.26mm16.13mm4.06mm5.08mm3SNon Standard1,000
8.5mm803316.32mm16.26mm16.13mm4.55mm5.08mm3SNon Standard1,000
8.5mm803316.32mm16.26mm16.13mm6.70mm7.20mm3ANon Standard1,000
9mm667419.81mm19.82mm19.74mm4.50mm5.80mm4SStandard1,000
9mm667419.81mm19.82mm19.74mm5.50mm5.97mm4SStandard1,000
9mm667419.81mm19.82mm19.74mm7.70mm8.13mm4AStandard1,000
10mm666819.81mm19.82mm19.74mm4.50mm5.80mm4SStandard1,000
10mm666819.81mm19.82mm19.74mm5.50mm5.97mm4SStandard1,000
10mm666819.81mm19.82mm19.74mm7.70mm8.13mm4AStandard1,000
10mm808219.81mm19.82mm19.74mm4.50mm5.80mm4SNon Standard1,000
10mm808219.81mm19.82mm19.74mm5.50mm5.97mm4SNon Standard1,000
10mm808219.81mm19.82mm19.74mm7.70mm8.13mm4ANon Standard1,000
10mm724926mm26.11mm#N/A6.00mm7.50mm5SNon Standard500
10mm724926mm26.11mm#N/A6.86mm7.24mm5SNon Standard500
11mm667319.81mm19.82mm19.74mm4.50mm5.80mm4SStandard1,000
11mm667319.81mm19.82mm19.74mm5.50mm5.97mm4SStandard1,000
11mm667319.81mm19.82mm19.74mm7.70mm8.13mm4AStandard1,000
12mm667526mm26.11mm#N/A6.00mm7.50mm5SStandard500
12mm667526mm26.11mm#N/A6.86mm7.24mm5SStandard500
12mm830429.4mm#N/A#N/A7.00mm9.00mm6SNon Standard1,000
13mm688526mm26.11mm#N/A6.00mm7.50mm5SStandard500
13mm688526mm26.11mm#N/A6.86mm7.24mm5SStandard500
14mm803426mm26.11mm#N/A6.00mm7.50mm5SNon Standard500
14mm803426mm26.11mm#N/A6.86mm7.24mm5SNon Standard500
14mm688129.4mm#N/A#N/A7.00mm9.00mm6SStandard1,000
15mm830529.4mm#N/A#N/A7.00mm9.00mm6SNon Standard1,000
15mm667629.4mm#N/A#N/A7.00mm9.00mm6SStandard1,000
16mm688229.4mm#N/A#N/A7.00mm9.00mm6SStandard1,000
17mm667729.4mm#N/A#N/A7.00mm9.00mm6SStandard1,000
18mm803529.4mm#N/A#N/A7.00mm9.00mm6SNon Standard1,000
18mm688338.2mm#N/A#N/A8.70mm11.70mm7SStandard500
18.4mm830629.4mm#N/A#N/A7.00mm9.00mm6SNon Standard1,000
19mm688438.2mm#N/A#N/A8.70mm11.70mm7SStandard500
19.85mm830829.4mm#N/A#N/A7.00mm9.00mm6SNon Standard1,000
20mm667838.2mm#N/A#N/A8.70mm11.70mm7SStandard500
20mm830938.2mm#N/A#N/A8.70mm11.70mm7SNon Standard500
20mm831043mm#N/A#N/A9.53mm12.45mm9SNon Standard500
21mm688638.2mm#N/A#N/A8.70mm11.70mm7SStandard500
22mm688938.2mm#N/A#N/A8.70mm11.70mm7SStandard500
23mm688739.9mm#N/A#N/A9.53mm12.95mm8SStandard500
24mm724139.9mm#N/A#N/A9.53mm12.95mm8SNon Standard500
24mm688843mm#N/A#N/A9.53mm12.45mm9SStandard500
25mm831139.9mm#N/A#N/A9.53mm12.95mm8SNon Standard500
25mm667943mm#N/A#N/A9.53mm12.45mm9SStandard500
27mm803643mm#N/A#N/A9.53mm12.45mm9SNon Standard500

Dome Caps, Axle Caps, Deep Axle Caps and Nylon Caps fasteners are available in a variety of materials:
Stainless Steel (S) Zinc Plated Mild Steel (A)

Dome Axle Caps for Starlock® Metric Push On Fasteners.

Diagram of a domed cap Illustration of a domed cap

The standard Dome Axle Cap style is dome and is manufactured from Stainless steel. The decorative Dome Axle Cap hides the end of the axle and the Starlock® push on fastener. This provides a more cosmetic appearance. The height of the Dome Axle Cap has been developed to allow the axle to penetrate through the Starlock® push on fastener sufficiently to provide maximum grip.

Deep Axle Caps for Starlock® Metric Push On Fasteners.

Diagram of an deep axle type cap Illustration of an deep axle type cap

The standard Deep Axle Cap is manufactured from Stainless steel and, like the dome cap, hides the end of the axle and the Starlock® push on fastener. The shape of the deep axle cap has been designed to allow for greater penetration of the axle through the Starlock® push on fastener than the dome style allowing the Starlock® push on fastener to grip further along the axle.

Extra Deep Axle Cap for Starlock® Metric Push On Fasteners.

Diagram of a extra deep axle type cap Illustration of a extra deep axle type cap

The standard Extra Deep Axle Cap is manufactured from electro plated steel and provides the maximum axle penetration of all the cap styles. The Extra Deep Axle Cap was with its increased height was originally manufactured to capture the axle supporting legs of the specially designed Self Aligning Starlock® push on fastener, but is used for other applications where maximum axle penetration is required.

Supplied in spring steel and stainless steel, Starlock® are manufactured to TS16949 in the United Kingdom by Baker & Finnemore Limited (BAK-FIN) located for over 125 years in the heart of England (Birmingham), next to the Jewellery Quarter.

Special parts on application.

A Starlock® securely positioning a wheel to an axle, with a variety of caps finishing off the appearance. View our video.

Please email sales for more information.