Capped Starlock® for Imperial Round Shafts

Image of Starlock caps Capped Starlock

Standard Capped Starlock®
Non standard Capped Starlock® may be subject to minimum order quantity.

Please use this page for Starlock® Capped Push On Fasteners for Metric Round Shafts.

Capped Starlock® fasteners are available in Stainless Steel (S) Zinc Plated Mild Steel (A).

Capped Starlock® for Imperial Round Shafts
ABCDType of CapOther InfoBox QTY
Shaft Size
Inch
Part No:
Capped
Dome cap Axle cap Deep
Axle cap
Shaft
Penetration
Height Cap Size Dome Axle Deep
Axle
1/16" 6339 0.285" #N/A #N/A .055" .105" 0 S Non Standard 5,000
1/16"62320.420"0.420"#N/A.100".120"1SStandard1,000
1/16"62320.420"0.420"#N/A.135".157"1SStandard1,000
3/32"63330.285"#N/A#N/A.055".105"0SNon Standard5,000
3/32"62210.420"0.420"#N/A.100".120"1SStandard1,000
3/32"62210.420"0.420"#N/A.135".157"1SStandard1,000
.104"68920.420"0.420"#N/A.100".120"1SNon Standard1,000
.104"68920.420"0.420"#N/A.135".157"1SNon Standard1,000
1/8"71610.285"#N/A#N/A.055".105"0SNon Standard5,000
1/8"62220.420"0.420"#N/A.100".120"1SStandard1,000
1/8"62220.420"0.420"#N/A.135".157"1SStandard1,000
.144"68910.420"0.420"#N/A.100".120"1SNon Standard1,000
.144"68910.420"0.420"#N/A.135".157"1SNon Standard1,000
5/32"62230.485"0.490"0.485".120".148"2SStandard1,000
5/32"62230.485"0.490"0.485".160".175"2SStandard1,000
5/32"62230.485"0.490"0.485".217".224"2AStandard1,000
3/16"80810.420"0.420"#N/A.100".120"1SNon Standard1,000
3/16"80810.420"0.420"#N/A.135".157"1SNon Standard1,000
3/16"62240.485"0.490"0.485".120".148"2SStandard1,000
3/16"62240.485"0.490"0.485".160".175"2SStandard1,000
3/16"62240.485"0.490"0.485".217".224"2AStandard1,000
3/16"72450.485"0.490"0.485".120".148"2SNon Standard1,000
3/16"72450.485"0.490"0.485".160".175"2SNon Standard1,000
3/16"72450.485"0.490"0.485".217".224"2ANon Standard1,000
3/16"80730.485"0.490"0.485".120".148"2SNon Standard1,000
3/16"80730.485"0.490"0.485".160".175"2SNon Standard1,000
3/16"80730.485"0.490"0.485".217".224"2ANon Standard1,000
3/16"72010.640"0.640"0.635".160".200"3SNon Standard1,000
3/16"72010.640"0.640"0.635".180".200"3SNon Standard1,000
3/16"72010.640"0.640"0.635".264".283"3ANon Standard1,000
3/16"66800.780"0.785"0.777".177".230"4SNon Standard1,000
3/16"66800.780"0.785"0.777".216".235"4SNon Standard1,000
3/16"66800.780"0.785"0.777".303".320"4ANon Standard1,000
7/32"62350.485"0.490"0.485".120".148"2SStandard1,000
7/32"62350.485"0.490"0.485".160".175"2SStandard1,000
7/32"62350.485"0.490"0.485".217".224"2AStandard1,000
7/32"71550.640"0.640"0.635".160".200"3SNon Standard1,000
7/32"71550.640"0.640"0.635".180".200"3SNon Standard1,000
7/32"71550.640"0.640"0.635".264".283"3ANon Standard1,000
7/32"80270.780"0.785"0.777".177".230"4SNon Standard1,000
7/32"80270.780"0.785"0.777".216".235"4SNon Standard1,000
7/32"80270.780"0.785"0.777".303".320"4ANon Standard1,000
1/4"62250.640"0.640"0.635".160".200"3SStandard1,000
1/4"62250.640"0.640"0.635".180".200"3SStandard1,000
1/4"62250.640"0.640"0.635".264".283"3AStandard1,000
1/4"72240.640"0.640"0.635".160".200"3SNon Standard1,000
1/4"72240.640"0.640"0.635".180".200"3SNon Standard1,000
1/4"72240.640"0.640"0.635".264".283"3ANon Standard1,000
1/4"80520.640"0.640"0.635".160".200"3SNon Standard1,000
1/4"80520.640"0.640"0.635".180".200"3SNon Standard1,000
1/4"80520.640"0.640"0.635".264".283"3ANon Standard1,000
1/4"71590.780"0.785"0.777".177".230"4SNon Standard1,000
1/4"71590.780"0.785"0.777".216".235"4SNon Standard1,000
1/4"71590.780"0.785"0.777".303".320"4ANon Standard1,000
1/4"83021.025"1.028"#N/A.236".295"5SNon Standard500
1/4"83021.025"1.028"#N/A.270".285"5SNon Standard500
1/4"82030.485"0.490"0.485".120".148"2SNon Standard1,000
1/4"82030.485"0.490"0.485".160".175"2SNon Standard1,000
1/4"82030.485"0.490"0.485".217".224"2ANon Standard1,000
9/32"62360.640"0.640"0.635".160".200"3SStandard1,000
9/32"62360.640"0.640"0.635".180".200"3SStandard1,000
9/32"62360.640"0.640"0.635".264".283"3AStandard1,000
9/32"71670.780"0.785"0.777".177".230"4SNon Standard1,000
9/32"71670.780"0.785"0.777".216".235"4SNon Standard1,000
9/32"71670.780"0.785"0.777".303".320"4ANon Standard1,000
9/32"71681.025"1.028"#N/A.236".295"5SNon Standard500
9/32"71681.025"1.028"#N/A.270".285"5SNon Standard500
9/32"80281.505"#N/A#N/A.343".460"7SNon Standard500
5/16"62260.640"0.640"0.635".160".200"3SStandard1,000
5/16"62260.640"0.640"0.635".180".200"3SStandard1,000
5/16"62260.640"0.640"0.635".264".283"3AStandard1,000
5/16"71690.640"0.640"0.635".160".200"3SNon Standard1,000
5/16"71690.640"0.640"0.635".180".200"3SNon Standard1,000
5/16"71690.640"0.640"0.635".264".283"3ANon Standard1,000
5/16"80420.640"0.640"0.635".160".200"3SNon Standard1,000
5/16"80420.640"0.640"0.635".180".200"3SNon Standard1,000
5/16"80420.640"0.640"0.635".264".283"3ANon Standard1,000
11/32"62380.780"0.785"0.777".177".230"4SStandard1,000
11/32"62380.780"0.785"0.777".216".235"4SStandard1,000
11/32"62380.780"0.785"0.777".303".320"4AStandard1,000
11/32"80291.025"1.028"#N/A.236".295"5SNon Standard500
11/32"80291.025"1.028"#N/A.270".285"5SNon Standard500
.365"62330.780"0.785"0.777".177".230"4SNon Standard1,000
.365"62330.780"0.785"0.777".216".235"4SNon Standard1,000
.365"62330.780"0.785"0.777".303".320"4ANon Standard1,000
3/8"62270.780"0.785"0.777".177".230"4SStandard1,000
3/8"62270.780"0.785"0.777".216".235"4SStandard1,000
3/8"62270.780"0.785"0.777".303".320"4AStandard1,000
3/8"71531.695"#N/A#N/A.375".490"9SNon Standard500
13/32"62390.780"0.785"0.777".177".230"4SStandard1,000
13/32"62390.780"0.785"0.777".216".235"4SStandard1,000
13/32"62390.780"0.785"0.777".303".320"4AStandard1,000
13/32"72081.025"1.028"#N/A.236".295"5SNon Standard500
13/32"72081.025"1.028"#N/A.270".285"5SNon Standard500
7/16"66610.780"0.785"0.777".177".230"4SNon Standard1,000
7/16"66610.780"0.785"0.777".216".235"4SNon Standard1,000
7/16"66610.780"0.785"0.777".303".320"4ANon Standard1,000
7/16"62281.025"1.028"#N/A.236".295"5SStandard500
7/16"62281.025"1.028"#N/A.270".285"5SStandard500
1/2"62291.025"1.028"#N/A.236".295"5SStandard500
17/32"62371.025"1.028"#N/A.270".285"5SStandard500
17/32"62371.025"1.028"#N/A.236".295"5SStandard500
17/32"62371.025"1.028"#N/A.270".285"5SStandard500
5/8"80771.025"1.028"#N/A.236".295"5SNon Standard500
5/8"80771.025"1.028"#N/A.270".285"5SNon Standard500
5/8"62311.025"1.028"#N/A.236".295"5SStandard500
5/8"62311.025"1.028"#N/A.270".285"5SStandard500
3/4"83071.505"#N/A#N/A.343".460"7SNon Standard500
3/4"62341.505"#N/A#N/A.343".460"7SStandard500
7/8"63351.565"#N/A#N/A.375".510"8SStandard500
1"80841.695"#N/A#N/A.375".490"9SNon Standard500
1"63341.695"#N/A#N/A.375".490"9SStandard500
11/8"70611.695"#N/A#N/A.375".490"9SNon Standard500

Dome Axle Caps for Starlock® Metric Push On Fasteners.

Diagram of a domed cap Illustration of a domed cap

The standard Dome Axle Cap style is dome and is manufactured from Stainless steel. The decorative Dome Axle Cap hides the end of the axle and the Starlock® push on fastener. This provides a more cosmetic appearance. The height of the Dome Axle Cap has been developed to allow the axle to penetrate through the Starlock® push on fastener sufficiently to provide maximum grip.

Deep Axle Caps for Starlock® Metric Push On Fasteners.

Diagram of an deep axle type cap Illustration of an deep axle type cap

The standard Deep Axle Cap is manufactured from Stainless steel and, like the dome cap, hides the end of the axle and the Starlock® push on fastener. The shape of the deep axle cap has been designed to allow for greater penetration of the axle through the Starlock® push on fastener than the dome style allowing the Starlock® push on fastener to grip further along the axle.

Extra Deep Axle Cap for Starlock® Metric Push On Fasteners.

Diagram of a extra deep axle type cap Illustration of a extra deep axle type cap

The standard Extra Deep Axle Cap is manufactured from electro plated steel and provides the maximum axle penetration of all the cap styles. The Extra Deep Axle Cap was with its increased height was originally manufactured to capture the axle supporting legs of the specially designed Self Aligning Starlock® push on fastener, but is used for other applications where maximum axle penetration is required.

Supplied in spring steel and stainless steel, Starlock® are manufactured to TS16949 in the United Kingdom by Baker & Finnemore Limited (BAK-FIN) located for over 125 years in the heart of England (Birmingham), next to the Jewellery Quarter.

Special parts on application.

A Starlock® securely positioning a wheel to an axle, with a variety of caps finishing off the appearance. View our video.

Please email sales for more information.